What is the Nhat Diem Hong Fleet Maturity Model in tire segment?

“Fleet maturity is not about adopting more technology. It is about changing how decisions are made.”

Nhat Diem Hong Fleet Maturity Model

A four-level framework for assessing the evolution of fleet decision-making from Reactive to Predictive management.

Two fleets can run the same tires on the same routes and still produce very different results. The difference rarely sits in the rubber. It sits in the decision: who decides, on what information, and how early.

The Nhat Diem Hong Fleet Maturity Model describes that difference as a four-level path: Reactive, Preventive, Condition-Based and Predictive. Each level changes the question a fleet asks about its tires, and with it the cost the fleet carries.

This article explains the four levels, how a fleet can place itself on the scale, and where to start moving up.

Why tire management needs a maturity model

Tires expose the quality of fleet decisions quickly. A tire is a visible, measurable asset. It has a pressure, a tread depth, a mileage, a position and a removal reason. Each of these can be recorded, and each is shaped by a decision someone made earlier.

A tire problem is also rarely only a tire problem. Irregular wear may point to alignment. Repeated pressure loss may point to inspection habits. Early removals may point to how the fleet rotates, repairs or assigns tires. Without a framework, these links stay invisible and every event is treated as a separate incident.

A maturity model gives the fleet a better question: not which tire to buy, but how the fleet decides.

Nhat Diem Hong believes a fleet should be assessed by its decision process, and by the systems it owns only in second place. A fleet with sensors and no routine to act on them is less mature than a fleet with a clipboard and a disciplined inspection round.

The four levels at a glance

Level Decision Data Action Objective
Reactive Experience Event data Fix Keep moving
Preventive Schedule Historical / basic Prevent Reduce failures
Condition-Based Condition Current asset data Prioritize Optimize
Predictive Forecast Historical + real-time Anticipate Optimize outcome

The data becomes richer from top to bottom. The more important change is in the Decision column.

Level 1 — Reactive: What happened?

At the Reactive level, the fleet responds after a problem occurs. A tire fails, it is replaced. A vehicle breaks down, it is repaired. Abnormal wear is found during an inspection, and corrective action follows.

Decisions rest on experience, driver feedback, mechanic judgment and immediate operational needs. Data exists as invoices, job cards and workshop notes, but it is rarely used to find patterns or to stop a problem from returning.

This approach has real strengths. It is fast, it needs no system, and a skilled mechanic can solve many problems on the spot. For a small fleet with simple routes, it can work.

The weakness appears with scale. Costs arrive as surprises: a roadside breakdown, a delayed delivery, an emergency tire purchase at whatever price the nearest supplier asks. Each event is solved, yet its cause is not recorded, so the next event looks new.

The objective at this level is simple:

Keep the fleet moving.

Level 2 — Preventive: What can we prevent?

The fleet begins to move from responding to problems toward preventing them. Maintenance schedules are set. Tire inspections become regular. Pressure checks, rotation, alignment and replacement intervals are standardized.

This is the first structural change. The fleet no longer waits for every problem to occur, and a routine replaces individual memory. Records start to matter, because a schedule only works if someone knows what was done and when.

Preventive management still relies on time, mileage and scheduled activity. A tire may be inspected at a fixed mileage because the calendar says so, whatever its actual condition. Some tires are inspected too often and others too late. A lightly loaded tire on a regional route and a heavily loaded tire on a demanding route receive the same treatment.

Typical indicators at this level include:

  • inspection completion rate;
  • number of roadside tire failures;
  • compliance with pressure checks and rotation intervals.

The objective becomes:

Prevent predictable failures before they happen.

Level 3 — Condition-Based: What is happening now?

At this stage, the fleet manages each asset according to its actual condition rather than a fixed schedule. For tires, the condition record can include:

  • pressure;
  • tread depth;
  • tire mileage;
  • wear pattern;
  • tire position;
  • damage;
  • removal history.

The same principle applies to vehicles, maintenance, fuel consumption and other fleet assets.

The question changes. Instead of asking “Is it time to inspect this tire?”, the fleet asks:

“What is the condition of this tire, and does it require action?”

Data becomes central. With current condition data, a fleet can identify risks early, compare performance between vehicles, positions and tire lines, prioritize work orders and measure the financial consequence of each condition. Two tires with the same mileage no longer receive the same treatment if one shows irregular wear and the other wears evenly.

This is also where cost per kilometer (CPK), the total tire cost divided by the kilometers the tire delivers, becomes practical. CPK cannot be calculated reliably without mileage and removal history for each tire. Tools such as the Tire CPK Equalizer and the Original Tread Depth Finder support this level because they work from recorded condition data.

The objective becomes:

Take the right action based on what is actually happening.

Level 4 — Predictive: What will happen next?

Predictive management takes the next step. Instead of describing the current condition, the fleet uses historical data, real-time information, analytics and, increasingly, AI to anticipate what comes next.

The goal is no longer to identify irregular wear after it appears. The fleet seeks to learn which tires are likely to be removed early, which vehicles are developing abnormal patterns, and where future maintenance cost is likely to emerge.

The question moves from “What is happening?” to:

“What is likely to happen, and what should we do now?”

At this level, tire management connects to the wider business: total cost of ownership (TCO), cost per kilometer, uptime, safety, fuel efficiency and long-term asset optimization. Decisions about tire selection, repair, retreading and replacement become part of asset strategy, with the financial consequence in view.

A caution applies. Prediction depends on the quality of the layers below it. A forecast built on incomplete removal records or inconsistent pressure data does not improve decisions; it only looks more advanced. A fleet cannot skip Level 3 and expect Level 4 to work.

Predictive management also keeps the value of experience. The judgment built at Level 1 becomes the check on what the model suggests.

The objective becomes:

Optimize the outcome.

Four levels, four ways of thinking

The four levels are more than four management systems. They are four ways of thinking:

  • Reactive → respond to the problem
  • Preventive → prevent the problem
  • Condition-Based → manage the current condition
  • Predictive → anticipate the outcome

Technology can accelerate the journey. Sensors, software and analytics make condition data easier to collect and forecasts easier to produce. Technology alone, however, does not make a fleet mature.

The real transition is a path from experience-driven decisions to process-driven decisions, then to data-driven decisions, and eventually to predictive decisions:

Experience → Process → Data → Prediction

Where does your fleet stand?

A fleet places itself on the scale by looking at how it behaves, and the systems it owns come second. Five diagnostic questions help:

  1. When a tire is removed, is the reason recorded and reviewed?
  2. Are inspections done on a defined schedule, with a record of who inspected and what was found?
  3. Does the fleet know the current pressure, tread depth and wear pattern of each tire, by position?
  4. Can the fleet calculate CPK by tire, by vehicle and by position?
  5. Does the fleet use its history to forecast which tires or vehicles will need action next?

The level is the highest one where the answers are consistently yes. If the answer to question 1 or 2 is no, the fleet is Reactive. Yes to both, but no to question 3, places it at Preventive. Yes up to question 4 means Condition-Based. Yes to all five, with action taken on the forecast, means Predictive.

A fleet can also sit at different levels for different assets. It may be Condition-Based on fuel and still Reactive on tires. Assess each asset group separately.

How to move up one level

The model works best when a fleet starts small and moves one level at a time:

  1. Name the current level honestly, by vehicle group or by site.
  2. Fix the record first: one removal reason list, one position code and one date for every tire event.
  3. Choose two or three indicators the fleet can influence, such as roadside failures, CPK and the share of tires removed for irregular wear.
  4. Run a controlled pilot on one vehicle group before expanding.
  5. Review monthly, and add technology only when the process can use the data it produces.

One limit applies. A fleet should avoid promising a CPK result until responsibilities are defined: who inspects, who repairs, who decides on removal. Without that, the number measures a mixture of decisions and no one can act on it.

FAQ

What is the Nhat Diem Hong Fleet Maturity Model?
A proprietary four-level framework developed by Nhat Diem Hong. It describes how fleets evolve from reactive, experience-driven management toward preventive, condition-based and predictive decision-making.

Does a fleet need sensors to reach Condition-Based management?
No. This level needs current, recorded condition data. Sensors speed up collection, but a disciplined inspection round with consistent records can support it.

Can a fleet skip a level?
In practice, no. Each level builds the data and the habits the next one needs.

Is a higher level always better?
Higher levels give more control, but the right level depends on fleet size, route complexity and operating cost. Reactive management can still work for a small, simple fleet.

Where does CPK fit in the model?
CPK becomes reliable at Level 3 and a central measure at Level 4.

Related reading: Fleet Maturity in Vietnam: Why Most Fleets Are Still Reactive · What is the Nhat Diem Hong Dealer Maturity Model?

Nhat Diem Hong

Nhat Diem Hong
Nhat Diem Honghttps://nhatdiemhong.blog
Nhat Diem Hong Commercial Tire & Fleet Specialist Specialized in tire lifecycle optimization, inflation strategy, load distribution analysis, and fleet operating cost control. Focused on real-world truck tire performance, maintenance efficiency, and data-driven fleet reliability improvement. nhatdiemhong.blog · LinkedIn

Relative articles

Comment

Most Popular